My 1990-2003 XT600E mods

[bacardi23]

Hey there!

Here is a list of mods I want to do on mine,comments are welcome(PLZ lol)

1. - 1989 kickstart (I've already fitted) .
   
2. - 02 YZ 250 front end DONE (fresh 10w oil and new oil seals DONE).
3. - UNIVERSAL triple clamps, one 7/8" and other is top triple clamp 1-1/8th (BOUGHT).
   
4. - Pro Taper fat bars (BOUGHT) Yamaha blue square pad (missing).
   
5. - Engine paint (done it but will probably have to redo it).
   
6. - Full 2003 XT600E (deep purplish blue) bodywork. (only missing both black side tank fairings)
   
7. - DIY YZ250F/YZ450F/WR450/CR450F stock exhaust. (BOUGHT)
8. - complete 2006 YZ250F rear end (BOUGHT) but depending on how dificult it'll be to fit...I might sell it at a higher price LOl and cut some costs.. lol
   
9. - KEDO.com stainless steel header pipes.
   
10. - YZ or similar gear shifter DATA at hand. no money lol
    
11. - passenger springloaded footpegs..
    
12. - frame sandblasting/paintjob. (Work in progress)
13. - New aluminum rims (stock XT600E 21"x1.85 front and 17"x2.50 rear because here in Portugal we have a very restrictive MOT laws) black with blue stripes with Buchanan HD stainless steel spokes and nipples.
14. I already got ASV F1 silver "unbreakable" levers and one even has a little "hot start" lever that I'll use for the Manual decompresser ;P
15. Will also check if a 2005 WR450 throttle tube with a aluminum balls bearing inner tube will work on the XT ;D OVERRIDE: Bought a KTM 640Supermoto throttle with cables for 30€ shipped.
    

What do you guys think, any comments? try to shoot me down lol


Ride safe!

Vando