I've had a few bikes and atv's that when they've sat for a couple weeks , the first time shifting into gear could be interesting . Most were like that when I bought them but after changing the oil to what I run , most have quit doing it . An XL600 I bought we couldn't get it to disengage , choked the motor off 4-5 times, pushed it back and forth in high gear ect.. took 1/2hr of rocking in the back of my truck for it to finally break loose(left it in gear for the trip home), worked fine once home. 4 days later it took 2 motor choke-offs to break loose again, but it completely quite after new oil was installed.
Only had 1 660 Raptor I bought brand new , clutch always stuck after sitting for 2-3 weeks , would need to hold all brakes and pop the clutch or several rocking back-n- forth, did it yet the day I sold it with 8k miles on it. This was before I started using a certain oil though. Moral of the story , be prepared for it to be stuck possibly next time it sits , usually it'll go away.
If it does try a different oil once to see if it helps.
|