Pulling a 3AJ alternator rotor
Anyone with experience pulling an alternator rotor off a 3AJ engine?
This is the electric start that has three hex-cap bolts going through the rotor and (presumably) into the alu spacer behind it.
Do you have to remove these three allen/hex bolts before pulling the rotor?
I have the nut off and have installed a suitable puller into the three M10 threaded holes, however it won't budge even with not-so-gentle taps on the main puller bolt that presses onto the end of the crank.
Help?
------------------
Barry
3AJ Tenere
__________________
Barry
XT600Z 3AJ Tenere (rebuild in progress)
SRX600
|