BMW Tubeless Spoked Wheels Maintenance
BMW is the only manufacturer to use spoked tubeless wheels. The design uses a cross-spoke pattern, with the spoke nipple at the hub instead of the rim. The wheels are extremely strong, but need some maintenance. However, they are EXTREMELY difficult to true. The factory builds them on a CNC machine, with a final tune by an expert using very special equipment. Your BMW dealer will not touch these wheels, insisting on replacement, despite the rims being available as a separate part.
Wheel builders:
Hagon Shocks, UK
I'm told they will repair and rebuild the BMW wheels at a reasonable price.
Woody's Wheel Works, USA
Woody Witte rebuilds GS tubeless wheels.
Woody says: "...$200.00 using good parts. When we try to save the customer money by re-using his existing spokes and nipples we run into problems...trying to dismantle the wheel, frozen/rusted grub screws and nipples, spokes that do not readily come out of the rim etc... we know lot's of tricks to minimize the cost, (but) the clock does tick at $60 hour flat rate, and we are constantly trying to find better deals and sources for these applications."
One of Tims rebuilt wheels
I have personally had the pleasure of truing one of these wheels. Don't bother. Send it to Woody. Trust me! (I've built hundreds of conventional wheels, and it normally takes an hour or so. But the BMW tubeless wheel I trued took me three days to get right. Mind you it was in Peru, in a back alley etc... but it was still very tough.)
One of the tricky parts of these wheels is the tiny little "grub" or "set" screws used in the end of the spke nipple to lock the nipple to the spoke. These are almost invisible, and the first time I ran into them I didn't know they were there, and couldn't figure out why I couldn't adjust the spoke!
Eventually I found it, and then began the hunt for a small enough allen screw to loosen it. The R100GS uses a 2.0mm allen wrench. I believe all models use the same one. Check! Make sure you have one in your tool kit.
The spoke nipple is steel, not brass like the old style ones, so are susceptible to rust. Many bikes with these wheels have a problem with the setscrew rusting in, making it almost impossible to get out. Highly recommended to spray a little WD-40 on them once in a while, or a dab of grease.
Instructions on spoke replacement.
"Get the spoke, nipple and grubscrew (setscrew). Put it in until just tight. Ring some of the spokes with a wrench and torque the new one until it sounds like the others. Install the setscrew. DO NOT TRY TO ADJUST ANY OTHER SPOKES or you'll be sending the wheel to me for a big bill. The tubeless wheels don't adjust like any other wheel so please don't try it. Now give the wheel a spin and see how much deflection you have and maybe you'll see why the spoke is gone. Catch a twig on a trail? BTDT
If the rim is within 1/8" not too bad on the rear for stump jumping. If more you've whacked something and it needs to come apart and be relaced. Ring all the spokes with a wrench and listen to how many sing and how many are dead. Older R11GSs with Akront rims were kinda soft in the torque dept and that might have caused the spoke to pop. In that case it may need a rebuild."
For more information and advice contact Woody or Hagon, info above.
And if you really want to do it all yourself, Ricardo Kuhn and Jon Jen did a major writeup on the job, in pdf format here.
Member login
Announcements
Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!
Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now, and add your information if we didn't find you.
Are you an Overland Adventure Traveller?
Does the smell of spices wafting through the air make you think of Zanzibar, a cacophony of honking horns is Cairo, or a swirl of brilliantly patterned clothing Guatemala? Then this is the site for you!
Hosted by Grant and Susan Johnson, RTW 1987-1998
Next HU Events![calendar](//www.horizonsunlimited.com/sites/all/themes/hu/assets/images/cal-icon.png)
HU Event and other updates on the HUBB Forum "Traveller's Advisories" thread.
ALL Dates subject to change.
2024:
- California: April 18-21
- Virginia: April 25-28
- Germany Summer: May 9-12
- Québec: May 17-19
- Bulgaria Mini: July 5-7
- CanWest: July 11-14
- Switzerland: August 15-18
- Ecuador: August 23-25
- Romania: August 30-Sept 1
- Austria: September 12-15
- France: September 20-22
- Germany Autumn: Oct 31-Nov 3
2025:
- Queensland is back! May 2-4 2025!
Add yourself to the Updates List for each event!
Questions about an event? Ask here
HU Achievable Dream is Online
and available now to stream on Vimeo!
ALL 15 chapters of the HU Achievable Dream Guide are available to download on Vimeo!
Binge watch over 18 hours of inspiring, informative and entertaining stories and tips from 150 travellers!
"a cross between entertaining stories, tech tips, and reference guide"
"A timeless introduction to Motorcycle Adventure Travel!"
Originally launched as a 7 DVD set, The Achievable Dream series can now be downloaded anywhere. OVER 18 hours of solid info take up zero space in your panniers. How convenient!
Books
![amazon](/sites/all/themes/hu/assets/images/amazon-pic.jpg)
All the best travel books and videos listed and often reviewed on HU's famous Books page. Check it out and get great travel books from all over the world.
NOTE: As an Amazon Affiliate we earn from qualifying purchases - thanks for your help supporting HU when you start from an HU Amazon link!