Quote:
Originally Posted by mollydog
When you install plates ... you go one drive, one driven, one drive, one driven and so on. Very simple. Just pay attention to how it all looks when you take it apart and duplicate on re-assembly. Basic. The first plate and maybe the last plate maybe slightly different to the rest in the clutch pack, so pay attention to put them all back in correct order. Not difficult to figure out.
|
These days it is just so easy to take photos at each stage ... much better than memory and they record things you may have missed but need to see on reassembly. so - photo at least - the clutch before disassembly,
- after the springs come out
- after the top plate comes off
- after the first plate comes off
- just before the last plate comes off
- after the last plate comes off
I'd probably photo as each thing or set of things come off... just to be certain.
Reassembly should be the reverse of the disassembly. Any torque settings should be observed particularly those on top of the springs.
|