Go Back   Horizons Unlimited - The HUBB > Technical, Bike forums > Yamaha Tech
Yamaha Tech Originally the Yamaha XT600 Tech Forum, due to demand it now includes all Yamaha's technical / mechanical / repair / preparation questions.
Photo by Andy Miller, UK, Taking a rest, Jokulsarlon, Iceland

I haven't been everywhere...
but it's on my list!


Photo by Andy Miller, UK,
Taking a rest,
Jokulsarlon, Iceland



Like Tree5Likes
  • 1 Post By Jens Eskildsen
  • 1 Post By steveloomis
  • 1 Post By jjrider
  • 1 Post By xtrock
  • 1 Post By xtrock

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10 Jan 2016
Registered Users
New on the HUBB
 
Join Date: Sep 2015
Location: Budapest
Posts: 13
Help! - Yamaha Tenere (3AJ) engine sound

Hi,

I have just bought my first Tenere, and I love it!

As this is my first one, could you please listen to its engine sound and tell your opinion about it? Unfortunately I have no experiences about the sound of a Tenere but I found it a bit knocky. Is something wrong, or is this 'normal'? If there is a problem, what should it be?

The video has been shoted after a cold start.



Thanks a lot!
Reply With Quote
  #2  
Old 10 Jan 2016
Registered Users
New on the HUBB
 
Join Date: Sep 2015
Location: Budapest
Posts: 13
Video link

https://www.youtube.com/watch?v=rEbn0hJm9Ts
Reply With Quote
  #3  
Old 10 Jan 2016
Registered Users
Veteran HUBBer
 
Join Date: Dec 2008
Location: Denmark
Posts: 1,417
Sounds a bit like the lovechild of pistonslap and loose valves.

Check the valveclearences, its pretty easy.
Reply With Quote
  #4  
Old 10 Jan 2016
Registered Users
Veteran HUBBer
 
Join Date: Sep 2012
Location: Middle USA
Posts: 349
I agree, sounds like valve clatter. Adjustment not hard, just fiddly. When you pull the "feeler gauge" thru the gap it should have some resistance. The trick is to be able to tighten the jam nut and not alter the clearance. I made a tool from a piece of brass tubing that fit over the square adjustment screw, wrapped the top of the brass tube with tape to make it easier to hold while tightening the jam nut. Recheck the clearance after tightening the jam nut and if not perfect do it again.

I just watch the rocker arm and when it is up I adjust that one.
__________________
'84 XT600 is now bored to 2nd oversize and new OEM pistons and rings installed. No more smoking.
Reply With Quote
  #5  
Old 11 Jan 2016
R.I.P. 25 November 2021
Veteran HUBBer
 
Join Date: Feb 2010
Posts: 688
Üdvözöljük Erdei, úgy hangzik, mint a szelephézagot nekem.

Tudta Ön, lovagolni ezt a csoportot?



Mezo.
Reply With Quote
  #6  
Old 11 Jan 2016
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Wisconsin, USA
Posts: 827
That sounds way more than valves . Take your sparkplug out , turn the motor over by hand with a socket on the flywheel nut. Using something like a 3/8 dowel(or for now a drinking straw) and spin the motor over till the piston comes to TDC the starts to go back down. Make sure that the piston has moved some downward. Now with a dowel push down on the piston to see if it'll move any little bit without the crank turning.
Reply With Quote
  #7  
Old 11 Jan 2016
xtrock's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Norway
Posts: 1,368
Doesnt sound good, this is more what its suppose to sound.

https://www.youtube.com/watch?v=2l82Sze0Nvk
Reply With Quote
  #8  
Old 11 Jan 2016
xtrock's Avatar
Registered Users
Veteran HUBBer
 
Join Date: May 2013
Location: Norway
Posts: 1,368
Quote:
Originally Posted by Mezo View Post
Üdvözöljük Erdei, úgy hangzik, mint a szelephézagot nekem.

Tudta Ön, lovagolni ezt a csoportot?



Mezo.
Nice video, here is some more enduro fun..


https://www.youtube.com/watch?v=pKT6OIkXS_I
Reply With Quote
  #9  
Old 12 Jan 2016
Registered Users
New on the HUBB
 
Join Date: Sep 2015
Location: Budapest
Posts: 13
Thanks!

Thank you all for your replies and support!

I will check the valve clearance first and see if the noise is gone or not.

@Mezo: As this is my first Tenere I will get her in shape till spring and I am going to get in touch with the hungarian Tenere Club. It's their video you have posted. Hopefully I will be participating in the next one.
Reply With Quote
Reply

Tags
1989, 3aj, engine, sound, tenere


Currently Active Users Viewing This Thread: 1 (0 Registered Users and/or Members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
3aj tenere knocking sound on cold start zuna89serbia Yamaha Tech 12 5 Apr 2013 01:53
Looking for 1995 yamaha xtz 660 tenere engine. tvytas Yamaha Tech 0 26 Apr 2012 18:34

 
 

Announcements

Thinking about traveling? Not sure about the whole thing? Watch the HU Achievable Dream Video Trailers and then get ALL the information you need to get inspired and learn how to travel anywhere in the world!

Have YOU ever wondered who has ridden around the world? We did too - and now here's the list of Circumnavigators!
Check it out now
, and add your information if we didn't find you.

Next HU Eventscalendar

ALL Dates subject to change.

2025 Confirmed Events:

  • Virginia: April 24-27 2025
  • Queensland is back! May 2-4 2025
  • Germany Summer: May 29-June 1 2025
  • CanWest: July 10-13 2025
  • Switzerland: Date TBC
  • Ecuador: Date TBC
  • Romania: Date TBC
  • Austria: Sept. 11-15
  • California: September 18-21
  • France: September 19-21 2025
  • Germany Autumn: Oct 30-Nov 2 2025

Add yourself to the Updates List for each event!

Questions about an event? Ask here

See all event details

 
World's most listened to Adventure Motorbike Show!
Check the RAW segments; Grant, your HU host is on every month!
Episodes below to listen to while you, err, pretend to do something or other...

Adventurous Bikers – We've got all your Hygiene & Protection needs SORTED! Powdered Hair & Body Wash, Moisturising Cream Insect Repellent, and Moisturising Cream Sunscreen SPF50. ESSENTIAL | CONVENIENT | FUNCTIONAL.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

2020 Edition of Chris Scott's Adventure Motorcycling Handbook.

"Ultimate global guide for red-blooded bikers planning overseas exploration. Covers choice & preparation of best bike, shipping overseas, baggage design, riding techniques, travel health, visas, documentation, safety and useful addresses." Recommended. (Grant)



Ripcord Rescue Travel Insurance.

Ripcord Rescue Travel Insurance™ combines into a single integrated program the best evacuation and rescue with the premier travel insurance coverages designed for adventurers.

Led by special operations veterans, Stanford Medicine affiliated physicians, paramedics and other travel experts, Ripcord is perfect for adventure seekers, climbers, skiers, sports enthusiasts, hunters, international travelers, humanitarian efforts, expeditions and more.

Ripcord travel protection is now available for ALL nationalities, and travel is covered on motorcycles of all sizes!


 

What others say about HU...

"This site is the BIBLE for international bike travelers." Greg, Australia

"Thank you! The web site, The travels, The insight, The inspiration, Everything, just thanks." Colin, UK

"My friend and I are planning a trip from Singapore to England... We found (the HU) site invaluable as an aid to planning and have based a lot of our purchases (bikes, riding gear, etc.) on what we have learned from this site." Phil, Australia

"I for one always had an adventurous spirit, but you and Susan lit the fire for my trip and I'll be forever grateful for what you two do to inspire others to just do it." Brent, USA

"Your website is a mecca of valuable information and the (video) series is informative, entertaining, and inspiring!" Jennifer, Canada

"Your worldwide organisation and events are the Go To places to for all serious touring and aspiring touring bikers." Trevor, South Africa

"This is the answer to all my questions." Haydn, Australia

"Keep going the excellent work you are doing for Horizons Unlimited - I love it!" Thomas, Germany

Lots more comments here!



Five books by Graham Field!

Diaries of a compulsive traveller
by Graham Field
Book, eBook, Audiobook

"A compelling, honest, inspiring and entertaining writing style with a built-in feel-good factor" Get them NOW from the authors' website and Amazon.com, Amazon.ca, Amazon.co.uk.



Back Road Map Books and Backroad GPS Maps for all of Canada - a must have!

New to Horizons Unlimited?

New to motorcycle travelling? New to the HU site? Confused? Too many options? It's really very simple - just 4 easy steps!

Horizons Unlimited was founded in 1997 by Grant and Susan Johnson following their journey around the world on a BMW R80G/S.

Susan and Grant Johnson Read more about Grant & Susan's story

Membership - help keep us going!

Horizons Unlimited is not a big multi-national company, just two people who love motorcycle travel and have grown what started as a hobby in 1997 into a full time job (usually 8-10 hours per day and 7 days a week) and a labour of love. To keep it going and a roof over our heads, we run events all over the world with the help of volunteers; we sell inspirational and informative DVDs; we have a few selected advertisers; and we make a small amount from memberships.

You don't have to be a Member to come to an HU meeting, access the website, or ask questions on the HUBB. What you get for your membership contribution is our sincere gratitude, good karma and knowing that you're helping to keep the motorcycle travel dream alive. Contributing Members and Gold Members do get additional features on the HUBB. Here's a list of all the Member benefits on the HUBB.




All times are GMT +1. The time now is 04:53.