Quote:
Originally Posted by no1sun
Thanks, I might have to go that route (next door neighbour has a Dremel). I didn't pull all the headlight and electrics out so will have to clear an access.
Cheers
Dave
Scotland
|
I was not reading correct, the frame part is just using a thin screw driver to smash out from top, tap around hard and it will come out, heat will make it easier. I was thinking about the bearing part sitting on the steering part you pull out, thats only part that is difficult. Must pull all apart first, cut the slice a little sideways so you dont hit bottom part.
Last edited by xtrock; 10 Jan 2022 at 09:33.
|